iDS-2CD7165G0-IZS
Camera | ||
---|---|---|
Image Sensor: | 1/1.8″ SONY Progressive Scan CCD | |
Signal System: | PAL/NTSC | |
Min. Illumination: | Color: 0.007 Lux @ (F1.2, AGC ON) 0 Lux with IR | |
Slow shutter: | Yes | |
Shutter time: | 1 s to 1/100,000 s | |
Lens: | 2.8 to 12 mm | |
Adjustment Range: | Pan: 0° to 355°, tilt: 0° to 75°, rotate: 0° to 355° | |
Day& Night: | IR Cut Filter | |
Wide Dynamic Range: | 120 dB | |
Digital noise reduction: | 3D DNR |
Compression Standard | ||
---|---|---|
Video Compression: | H.265+/H.265/H.264+/H.264/MJPEG | |
H.264 code profile: | Baseline Profile/Main Profile/High Profile | |
Video bit rate: | 32Kbps~16Mbps | |
Audio Compression: | G.711/G.722.1/G.726/MP2L2/PCM | |
Audio bit rate: | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/32Kbps(PCM) | |
Dual Stream: | Yes | |
Triple Streams: | Yes |
Image | ||
---|---|---|
Max. Image Resolution: | 3072 x 2048 | |
Frame Rate: | 50Hz: 25fps (3200 × 1800, 3072 × 2048, 2560 × 1440, 1920 × 1080, 1280 × 720) 60Hz: 30fps (3200 × 1800, 3072 × 2048, 2560 × 1440, 1920 × 1080, 1280 × 720) | |
Sub Stream: | 50Hz: 25fps (704 × 576, 640 × 480) 60Hz: 30fps (704 × 480, 640 × 480) | |
Third Stream: | 50Hz: 25fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60Hz: 30fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480) | |
Image Enhancement: | BLC, HLC, Defog, EIS | |
Target Cropping: | Yes | |
BLC: | Support | |
HLC: | Support | |
Smart Defog: | Support | |
EIS: | Support | |
Picture Overlay: | LOGO picture can be overlaid on video with 128 × 128 24bit bmp format | |
Day/Night Switch: | Auto/Schedule/Day/Night/Triggered by Alarm In |
Network | ||
---|---|---|
Protocols: | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
Intelligent | ||
---|---|---|
Face Capture: | Face detection performance: up to 30 faces per frame Detectable face position:͗ supports swing left and right from -65° to 65°, tilt up and down from -45° to 45° | |
Behavior analysis: | Line crossing, intrusion, region entrance, region exiting. Support alarm triggering by specified target types (human and vehicle).Filtering out mistaken alarm caused by target types such as leaf, light, animal, and flag,etc. |
Interface | ||
---|---|---|
Communication Interface: | 1 RJ45 10M/100M/1000M Ethernet port 1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive) | |
Alarm: | 1-ch input, 1-ch output (up to 24 VDC 1A or 110 VAC 500 mA) | |
Alarm Input: | 1 | |
Alarm Output: | 1 | |
Reset Button: | Yes |
Audio | ||
---|---|---|
Environment Noise Filtering: | Support |
Smart Feature-set | ||
---|---|---|
Behavior Analysis: | Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal | |
Line Crossing Detection: | Cross a pre-defined virtual line | |
Intrusion Detection: | Enter and loiter in a pre-defined virtual region | |
Region Entrance: | Enter a pre-defined virtual region from the outside place | |
Region Exiting: | Exit from a pre-defined virtual region | |
Unattended Baggage: | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials | |
Object Removal: | Objects removed from the pre-defined region, such as the exhibits on display. | |
Exception Detections: | Scene change detection, defocus detection | |
Detection/Recognition: | Face Detection | |
Statistics: | Object Counting (Entrance and Exit object number is accounted and showed on screen in real time) |
General | ||
---|---|---|
IR Range: | Up to 30 m | |
Operation Condition: | -30 °C to 60 °C (-22 °F to 140 °F), humidity 95% or less (non-condensing) | |
Power Supply: | 12 V DC ± 20%, PoE (802.3af, class 3) | |
Power Consumption: | 12 VDC ± 20%: 0.7 A, max. 8 W PoE (802.3af 36 V to 57 V): 0.3 A to 0.2 A | |
Dimensions: | Camera: Φ140.5 × 122.6 mm (Φ5.5″ × 4.8″) With package: 244 × 174 × 173 mm (9.6″ × 6.9″ × 6.8″) | |
Weight: | Camera: approx. 950 g (2.09 lb.) With Package: approx. 1300 g (2.87 lb.) |