Camera IP thông minh DS-2CD7A26G0-IZ(H)S(Y)

Mã: DS-2CD7A26G0-IZ(H)S(Y)
Danh mục: .

– Camera nhận dạng biển số DeepinView.

– Nhận dạng biển số ô tô/ xe máy.

– Độ phân giải: 1920×1080 @ 60fps.

– Ống kính: 2.8~12mm.

– Độ nhạy sáng: 0.002 Lux @ F1.2, AGC ON.

– Chuẩn nén: H.265+, H.265, H.264+, H.264.

– Chống ngược sáng thực WDR 140dB.

– Hỗ trợ 5 luồng dữ liệu.

– Hỗ trợ khe cắm thẻ nhớ tối đa 256GB.

– Hỗ trợ 1 cổng báo động vào/ra.

– Tiêu chuẩn chống bụi nước: IP67.

– Tiêu chuẩn chống va đập: IK10.

– Tầm quan sát hồng ngoại: 50 mét.

– Phù hợp dùng cho cổng, lối ra vào.

Product Description

Đặc tính kỹ thuật DS-2CD7A26G0-IZ(H)S(Y)

Camera
Image Sensor1/1.8 inch Progressive Scan CMOS
Signal SystemPAL/NTSC
Min. IlluminationColor: 0.002 Lux @ (F1.2, AGC ON), 0 Lux with IR
Slow shutterYes
Shutter time1 s to 1/100,000 s
Lens2.8 to 12 mm: horizontal FOV 103.3° to 38.6°, vertical FOV 54.2° to 21.9°, diagonal FOV 124.2° to 44.3°
Adjustment RangeBracket, pan: 0° to 355°, tilt: 0° to 90°, rotate: 0° to 360°
Day& NightIR Cut Filter
Wide Dynamic Range140dB
Compression Standard
Video CompressionH.265+/H.265/H.264+/H.264/MJPEG
H.264 code profileBaseline Profile/Main Profile/High Profile
Video bit rate32Kbps~16Mbps
Image
Max. Image Resolution1920 x 1080
Image EnhancementBLC, HLC, 3D DNR, Defog, EIS
BLCSupport
HLCSupport
Smart DefogSupport
EISSupport
3D DNRSupport
Picture OverlayLOGO picture can be overlaid on video with 128 × 128 24bit bmp format
Day/Night SwitchDay/Night/Auto/Schedule/Triggered by Alarm In/ Triggered by video
Network
Network StoragemicroSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR
ProtocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Intelligent
Behavior analysisLine crossing detection, intrusion detection, region entrance detection, region exiting detection, unattended baggage detection, object removal detection
Interface
Communication Interface:1 RJ45 10M/100M/1000M Ethernet port
1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)
Alarm2 inputs, 2 outputs (up to 24VDC 1A or 110VAC 500mA)
Video Output1Vp-p Composite Output (75 Ω, BNC)
On-board storageBuilt-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset ButtonYes
Smart Feature-set
Behavior AnalysisLine crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing DetectionCross a pre-defined virtual line
Intrusion DetectionEnter and loiter in a pre-defined virtual region
Region EntranceEnter a pre-defined virtual region from the outside place
Region ExitingExit from a pre-defined virtual region
Unattended BaggageObjects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object RemovalObjects removed from the pre-defined region, such as the exhibits on display
Exception DetectionsScene change detection, defocus detection
General
IR Rangeup to 50m
Operation Condition-30°C to 60°C
Power Consumption12 VDC, 1.2 A, max. 14 W; PoE (802.3at, 42.5 V to 57 V), 0.4 A to 0.3 A
Impact ProtectionIK10
Weather ProofIP67
DimensionsΦ140 × 351 mm
Weightapprox. 2.5 kg